Direct Manufacturing Source

Factory-Direct Slicer Blades & Drive Belts

Engineered specifically for commercial food equipment repair contractors.

Direct drop-in OEM tolerances for Bizerba, Hobart, and Globe commercial slicers. Save 35% to 50% compared to regional catalog distributors.

Request Contractor Wholesale Sheet Explore Precision Lineup
AcuBlade Commercial Kitchen Slicer Wear-Parts on Service Bench

Service Fleet Advantage

Blade Metallurgy: 440C Martensitic High-Carbon (HRC 58–60)
Radial Runout Tolerance: ≤ 0.03 mm Dial-Indicator Verified
Belt Core Construction: Chloroprene (CR) + Continuous Fiberglass
Sample Dispatch: Dispatches in 2 Business Days
Packaging Standard: Neutral Unbranded Fleet Ready
Restricted to Commercial Kitchen Service Technicians & Repair Fleets • Bench Test Samples Available

Commercial Kitchen Wear-Parts

Pre-engineered, direct-fit replacement components built for daily commercial meatroom duty cycles.

13 inch 4-Hole 330mm Precision Slicer Knife
Top Velocity

13" Precision Slicer Blade (4-Hole)

330mm • 4 Mounting Holes • Fits Bizerba G13, SE12, VS8, A330
Outer Diameter ∅331.4 mm (13" / 330mm Nominal)
Mount Pattern 4 Holes (∅12.3 c'bore on ∅70mm PCD)
Center Hole ∅57.0 mm Precision Spindle Pilot
Material / Hardness Food-Grade 440C Stainless / HRC 58–60
Cross Reference OEM #38080337000 / NBS BZK-4 / LF 5166427
Wholesale Tiers: Available (Save 35–45%)
Request Confidential Price Sheet
10PJ432 Heavy-Duty Slicer Drive Belt for Bizerba
Ref: 50009490000

10PJ432 Heavy-Duty Drive Belt

Bizerba SE12 / SE12D Main Blade Spindle Drive
Profile / Ribs 10-Rib (10PJ) / 23.4 mm Width
Effective Length 432 mm Pitch Length (170J10)
Elastomer Oil & Heat Resistant Chloroprene (CR)
Tensile Core Zero-Stretch Continuous Fiberglass Cord
Rib Surface Low-Friction Wear-Resistant Nylon Fabric
Wholesale Tiers: Available (Save 40–50%)
Request Confidential Price Sheet
200J-6 Multi-Rib Belt for Hobart 2000 Series
Ref: 00-438845

200J-6 Drive Belt (PJ508)

Hobart 2000 Series (2612, 2712, 2812, HS6)
Profile / Ribs 6-Rib (6PJ) / ~14.0 mm Width
Effective Length 508 mm Pitch (20.0" / NBS HS140 Spec)
Fitment Mapping Drop-in replacement for Hobart 438845
Cord Metallurgy High-Modulus Continuous Fiberglass
Branding Neutral Unbranded / Industrial Clean
Wholesale Tiers: Available (Save 40–50%)
Request Confidential Price Sheet
10PJ406 Motor Drive Belt for Bizerba SE12
Ref: 60370114000

10PJ406 Motor Drive Belt

Bizerba SE12 Motor Transmission (J10-406)
Profile / Ribs Full 10-Rib Specification (Never 8-Rib)
Effective Length 406 mm Pitch (16.0" Pitch / 160J10)
Engineering Standard SE12 Manual P21 Item 10-85 Compliant
Torque Rating High Static Heavy-Duty Grip
Tolerance Strict ISO Pitch Matching
Wholesale Tiers: Available (Save 45–55%)
Request Confidential Price Sheet
Bizerba SE12 Complete Overhaul Combo Kit
Service Van Solution

Bizerba SE12 Complete Overhaul Combo Kit

Includes (1x) 13" 4-Hole 440C Precision Blade + (1x) 10PJ432 Heavy-Duty Drive Belt

Eliminate callbacks. Standard commercial service practice: whenever replacing a glazed or micro-chipped slicer blade, always install a fresh drive belt to restore factory-rated torque and eliminate cold cheese slippage.

  • Single-box shipping directly onto your service van inventory shelf
  • Guaranteed pairing compatibility for Bizerba SE12 & SE12D models
  • Zero-stretch fiberglass belt eliminates mid-season tensioning adjustments
Combo Wholesale Tiers Open

Tiered volume pricing starting from 5+ overhaul kits.

Request Combo Price & Test Kit
Strict Metrology & CAD Tolerancing

Precision Engineering & Dimensional Verifications

Every blade is machined to strict OEM drop-in counterbore geometries and dynamic balance tolerances.

13 inch 4-Hole Commercial Slicer Blade CAD Blueprint
AcuBlade Supply • 13" 4-Hole Precision Circular Blade Profile (CAD Spec Sheet)

Why Dimensional Tolerances Matter to Technicians

Commercial meat slicers run at high spindle velocities. Inferior replacement blades with poor concentricity or incorrect dish taper cause severe rubbing against the thickness gauge plate and meat table, generating friction heat that cooks delicate deli meats.

  • Exact Outer Diameter (∅331.4 mm): True 13-inch full-sweep cutting profile for clean deli slices.
  • 4-Hole Precision Mounting: 4-∅12.3 counterbore holes spaced on exact ∅70 mm PCD circle.
  • Compound Dish Bevels: Engineered 6.85° / 8.2° dual back-taper to eliminate product drag and motor strain.
  • Runout ≤ 0.03 mm: Optical dial-indicator checked to eliminate blade wobble and seal chatter.
Request CAD Blueprints & Step Files

Engineered for Contractors, Not Catalog Middlemen

How AcuBlade Supply compares to traditional regional aftermarket distributor networks.

← Swipe horizontally to view full comparison →
Feature / Specification AcuBlade Supply (Direct Source) US Aftermarket Catalogs (Alfa / NBS)
13" Blade Metallurgy 440C High-Carbon Stainless (HRC 58–60) Mixed 420/440B variants or private label
Runout / Radial Wobble Guaranteed ≤ 0.03 mm 0.05 mm – 0.10 mm acceptable tolerance
Contractor Price Level Direct Source Wholesale (Save 35–50%) Multiple distribution markup layers
Drive Belt Build Chloroprene (CR) + Continuous Fiberglass Varying aftermarket rubber blends
Packaging Neutral industrial shock-resistant box Distributor branded retail box
Contractor Support ✓ Direct engineering & drawing verification General catalog call center representatives

Commercial Kitchen Grade Reliability

Every batch undergoes strict metallurgical and physical testing before dispatch.

Φ

Cryogenic Quenched 440C

Blades undergo vacuum quenching followed by deep cryogenic stabilization to maintain an ultra-sharp razor edge across hundreds of operating hours without micro-chipping.

∝

Precision Ground Runout

Every 13-inch circular blade is verified on optical dial indicators to hold lateral deflection within 0.03mm, eliminating friction rub against meat gauges and blade guards.

≡

Continuous Fiberglass Cords

Our PJ multi-rib belts incorporate helically wound fiberglass cores embedded in chloroprene rubber, providing zero stretch and eliminating mid-season tension adjustments.

±

100% Drop-In Verified

No field modifications required. Dimensions, mounting hole patterns, and bevel angles mirror OEM drawings for Bizerba SE12/G13, Globe 3000/4000, and Hobart 2000 series.

Frequently Asked Questions

Common questions from commercial kitchen service technicians and fleet managers.

Are your wear-parts 100% compatible with OEM units?

Yes. All blades and belts are precision-manufactured to match the exact dimensional and metallurgical specifications of Hobart, Bizerba, and Globe slicers. They fit as direct drop-in replacements with no machine modifications required.

How do you handle evaluation samples?

We provide bench evaluation samples for licensed repair contractors. Evaluation orders dispatch via expedited air courier within 2 business days so your technicians can verify tolerances and edge retention on your own bench.

Why are wholesale prices restricted?

We supply strictly to independent service contractors and commercial repair fleets. We protect our contractors' service margins by not publishing wholesale tier pricing openly to retail restaurant operators.

What are your delivery lead times for fleet stock?

Sample and small-pack orders arrive in 5–8 business days via express courier. Bulk fleet restocking orders are dispatched under scheduled air or sea freight with end-to-end tracking directly to your shop or distribution hub.

Request Contractor Wholesale Sheet & Bench Samples

Restricted to licensed service operations and commercial repair fleets. Receive our confidential price sheet and volume tiers within 4 business hours.

✓ Sample Orders Ship Within 2 Business Days ✓ Bench Test Validation Guaranteed ✓ Direct Technical Support